Our offices will close at 3:00PM ET on Monday, Dec 23rd. Please note our shipping changes for Monday.: FedEx Priority (and free 2-day delivery) cutoff will be 3:00 PM ET. Freight shipments, FedEx ground and placing orders for pickup deadline is 1:00PM ET. No UPS shipping will be available on Monday. Merry Christmas to each of you and your families from employees of AutomationDirect.
ProSense Temperature Transmitters from KickStart at AutomationDirect
https://www.automationdirect.com/temperature-transmitters (VID-TE-0002)
Today I am going to show you our new Temperature transmitters from our brand: ProSense.
We are adding forty eight new parts to our temperature transmitter line to better suite your needs.
To give you a little info on temperature transmitters: they allow you to take a weak, low-level RTD or thermocouple temperature sensor signal, and convert it to a high-level analog signal more appropriate for long-distance transmission through a loud plant, and prepared for direct interface with a Loop Controller, PLC, or DCS.
To enhance measurement accuracy, transmitters are calibrated to respond between two measurement points. This advantage allows a complete range to be monitored, while placing measurement emphasis on a specific segment of the range most critical to the process
We now have twenty two non-programmable pre-configured head mount transmitters and twenty two non-programmable pre-configured DIN rail mount transmitters, one programmable head mount and one programmable DIN rail mount style as well as a USB configuration cable and as usual.. free downloadable configuration software.
The non-programmable styles have three wire pt100 RTD and three Thermocouple inputs with four to twenty milli amp outputs. The ranges are negative forty degrees F all the way up to two thousand degrees F depending on the transmitter.
The Programmable styles have nine different RTD and twelve thermocouple inputs as well as millivolt and the outputs can be setup for four to twenty milli amp or twenty to four milli amp. The ranges are HUGE with negative four hundred and fifty four degrees F up to four thousand, five hundred and twenty three degrees F depending on the transmitter.
The main difference on the head style and DIN style are how and where they are mounted as well as the environmental protection ratings and the power supply ranges.
You can find the agency approvals and specs for these new prosense temperature transmitters on our website at: https://www.automationdirect.com/adc/home/home
Don't forget: we sell temperature probes, RTDs, thermocouples and more!
Check back with us often on AutomationDirects websites or on
https://www.youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about these temperature transmitters or how you plan to use them in your application by leaving us a comment down below.
Thanks for watching and we hope to see you again soon.
Check out all of our videos at https://www.AutomationDirect.com/Videos
To subscribe: https://www.youtube.com/user/automationdirect?sub_confirmation=1
Facebook: https://www.facebook.com/AutomationDirect
Twitter: https://twitter.com/AutomationDirec
LinkedIn: https://www.linkedin.com/company/automationdirect
**Prices were valid at the time the video was released and are subject to change.
Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show you our new Temperature transmitters from our brand: ProSense. We are adding forty eight new parts to our temperature transmitter line to better suite your needs. To give you a little info on temperature transmitters: they allow you to take a weak, low-level RTD or thermocouple temperature sensor signal, and convert it to a high-level analog signal more appropriate for long-distance transmission through a loud plant, and prepared for direct interface with a Loop Controller, PLC, or DCS. To enhance measurement accuracy, transmitters are calibrated to respond between two measurement points. This advantage allows a complete range to be monitored, while placing measurement emphasis on a specific segment of the range most critical to the process We now have twenty two non-programmable pre-configured head mount transmitters and twenty two non-programmable pre-configured DIN rail mount transmitters, one programmable head mount and one programmable DIN rail mount style as well as a USB configuration cable and as usual.. free downloadable configuration software. The non-programmable styles have three wire pt100 RTD and three Thermocouple inputs with four to twenty milli amp outputs. The ranges are negative forty degrees F all the way up to two thousand degrees F depending on the transmitter. The Programmable styles have nine different RTD and twelve thermocouple inputs as well as millivolt and the outputs can be setup for four to twenty milli amp or twenty to four milli amp. The ranges are HUGE with negative four hundred and fifty four degrees F up to four thousand, five hundred and twenty three degrees F depending on the transmitter. The main difference on the head style and DIN style are how and where they are mounted as well as the environmental protection ratings and the power supply ranges. You can find the agency approvals and specs for these new prosense temperature transmitters on our website at: www.automationdirect.com Don’t forget: we sell temperature probes, RTDs, thermocouples and more! Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about these temperature transmitters or how you plan to use them in your application by leaving us a comment down below. Thanks for watching and we hope to see you again soon.
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...