Loading...
- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Accessories for cable-pull safety switches include bulk pull cable in galvanized or stainless steel, eye bolts, cable tensioner/grippers, tensioner springs, pulleys, cable clamps, eye thimbles, indicator lights, and complete kits that include pull cable and all installation hardware.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Cable-Pull Safety Switches
Category Selection
For applications with hazards that cannot be isolated with typical machine guarding, cable pull switches provide an emergency stop function that is easily accessible anywhere along the cable length. Ideal for systems with exposed hazards including conveyors and presses, these switches will reliably shut down equipment when the stop rope is pulled and the internal circuit opens.
- Switches have a positive mechanical linkage between the switch contacts and the wire rope.
- On pulling the rope, anywhere along the length, the safety contacts are positively opened and the auxiliary contacts are closed.
- The switches are mechanically latched and can then only be returned to the operational condition by pressing the reset button.
- An optional 2-color LED indicator allows switch status to be viewed from a distance.
- Cable-pull safety switches feature rope break monitoring to ensure system integrity.
These safety interlock and safety limit switches from IDEM and Comepi are developed and manufactured according to IEC and EN European standards and are UL listed for Type 4 machine safety/ OSHA machine guarding.
Cable-Pull Configuration Examples
For part listings and specifications, go to Shop Now
Cable-Pull Safety Switches
A variety of cable-pull switches facilitate readily accessible emergency stop capability along production lines or around any hazardous machinery.
- Seven max protection length classes: 15m, 25m, 50m, 80m, 100m, 125m and 250m
- Standard and compact housings
- Housing materials of fiberglass-reinforced plastic, die-cast aluminum, or stainless steel
- IP67 enclosure rating (IP69K washdown with stainless steel body)
- N.O. and N.C. contact configuration options
- 1/2 in. NPT female conduit fittings
- Models available with 90-degree adjustable head
- Rope pull kits sold separately, recommended for increased reliability
Accessories
Accessories for cable-pull safety switches include pull cable, eye bolts and more.
- Bulk pull cable in galvanized or stainless steel
- Eye bolts
- Cable tensioner/grippers
- Tensioner springs Pulleys
- Cable clamps
- Eye thimbles
- Indicator lights
- Complete kits that include pull cable and all installation hardware
Warning: Machine safety products sold by AutomationDirect are safety components only.
The purchaser/installer is solely responsible for the application of these components and ensuring all necessary steps have been taken to assure each application and use meets all performance and applicable safety requirements and/or local, national and/or international safety codes as required by the application. AutomationDirect cannot certify that our products used solely or in conjunction with other AutomationDirect or other vendors products will assure safety for any application.
Any person using or applying any products sold by AutomationDirect is responsible for learning the safety requirements for their individual application and applying them, and therefore assumes all risks, and accepts full and complete responsibility for the and suitability of the product for their respective application.
AutomationDirect does not provide design or consulting services, and cannot advise whether any specific application or use of our products would ensure compliance with the safety requirements for any application.
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...